Custom Contact Surfaces for Feeding, Holding, Cushioning and Product Transfer
Sables supplies custom rubber coated timing belts for feeding, holding, positioning and product-contact applications. Backed by 8M+ belts annual production capacity, 60+ patents and service experience with 20,000+ businesses, we support OEM and ODM projects from sample and drawing development to repeat-order production.
Select the coating from the contact result required at each stage. Separate feeding, holding, product protection, transfer and release needs before specifying one working surface for the complete machine.
Product Contact Requirement
Coating Selection Focus
Start or accelerate a product
Traction level, contact pressure, slip and surface direction
Hold variable product shapes
Solid or cellular form, deformation, skin and recovery
Protect a fragile surface
Pressure distribution, marking limit, cleanliness and cuts
Release at a transfer
Peel angle, tack, texture, edge and uncoated zone
Maintain a repeatable height
Finished datum, wear map, grinding and compression cycle
Bottles, glass, molded parts and finished packs may need local conformity and cushioning. Record allowable pressure, deformation, surface marking and product stability at the contact point.
Define whether the belt must start a stationary product, accelerate it, climb an incline or match another conveyor. Grip should be sufficient for controlled motion without preventing clean release.
The surface used for holding may need a different finish or geometry at discharge. Check peel-off angle, transfer gap, dwell, product tack and the timing window at every handoff.
Count rubbing, sliding, impact, stop-start contact and cleaning cycles. Confirm that finished thickness and flexibility remain compatible with the smallest pulley, back-bending, guides and available tension travel.
Select a coating by its response at the product interface rather than by color or a generic compound name. Solid rubber, cellular or foam rubber, and different surface finishes can behave very differently in grip, cushioning, bending, release and recovery.
Solid rubber can provide a stable working height and controlled traction where product shape is consistent. Hardness, compound response, finish and wear pattern determine how the contact plane changes over time.
Cellular or foam structures can conform to changing profiles, distribute contact pressure and cushion fragile products. Density, cell structure, skin, thickness and recovery should be evaluated together with nominal hardness.
A smooth skin, rough texture, fabric impression, ground face or machined pattern can alter initial grip, cleaning response, marking and release even when the underlying coating material is unchanged.
Specify full width, inset strips, multiple lanes or intermittent zones. Each edge requires a defined position, termination geometry and clearance from flanges, guides and product shoulders.
Sables rubber coated timing belts use an integrated one-piece molding process rather than a separately bonded cover. Performance depends on matching the base belt geometry, coating material, molded thickness, edge geometry and post-processing to the required product-contact task.
Confirm tooth profile, pitch, length or tooth count, width, tensile member and belt form before coating. For applicable metric curvilinear synchronous belt systems, ISO 13050:2022 can be used as a dimensional reference; the selected base belt must still match the actual pulleys and route.
Define coating material, hardness, thickness and molded coverage area as part of the finished belt specification. Because the coating is integrally formed with the belt rather than attached as a separate adhesive-bonded layer, approval should focus on finished geometry, surface performance, bending behavior and durability under the actual contact cycle.
State base thickness, coating thickness and finished overall height from named datums. Draw flush, inset, beveled, radiused or sealed edges and identify left and right offsets instead of assuming symmetry.
Grinding, grooves, reliefs or holes remove material after coating. Define the finished surface and keep-out zones, then connect the base belt, coating grade or batch, finished dimensions, surface map, joint position and approved sample to one released code.
The coating material affects grip, wear, oil and chemical resistance, temperature range, cushioning, marking and release. ISO 1629:2025 standardizes abbreviations for basic rubbers; the final compound and grade must still be checked against the actual product, cleaning method and operating environment.
Natural-rubber and Linatex-type covers provide strong grip, elasticity and abrasion resistance for film pulling, carton or paper feeding and glass handling. Confirm oil, heat and marking limits before approval.
NBR is commonly considered where the surface meets oil, grease or oily products. It suits many printing, packaging and industrial feeding duties, but the exact chemical and temperature exposure still needs review.
EPDM is useful for ozone, weather, hot-water and outdoor exposure. It is not normally the first choice for continuous contact with mineral oils, so the full environment should be stated.
Silicone offers temperature stability, flexibility and clean release for heat-sealing, food-packaging and delicate-product handling. Food-contact use requires the correct documented compound rather than a color-based assumption.
FKM can be evaluated for demanding heat, oil, fuel and chemical exposure. Cost, hardness, bonding route and repeated bending should be confirmed before sampling.
Sponge or foam covers conform to irregular shapes and cushion fragile products. Density, open- or closed-cell structure, skin, thickness and recovery determine the final handling result.
Sables provides OEM and ODM services for distributors, equipment manufacturers, engineering companies and private-label brands. We can develop rubber coated timing belts based on drawings, samples, machine requirements and product-contact conditions.
Customize coating material, thickness, hardness, texture, grooves and perforations to meet specific feeding, gripping, positioning and release requirements.
Provide a belt sample, drawing or application details. We support specification confirmation, coating selection, sample development and replacement matching.
OEM branding, logo marking, custom labels and packaging are available for distributors, equipment manufacturers and private-label brands.
We support prototypes, sample testing, trial orders and repeat production with controlled specifications to maintain consistent quality across batches.
Rubber coated timing belts are used when a machine needs synchronous movement together with controlled product contact. The coating material, hardness, thickness and surface pattern should be selected for the actual product and process stage.
High-friction covers help grip and pull film, pouches, cartons and finished packs in vertical packaging, sealing, folder-gluer and infeed systems.
Stable friction supports accurate paper, label, envelope and sheet feeding while the timing belt teeth maintain indexing and registration.
Resilient rubber or sponge surfaces can cushion glass, bottles, panels and molded parts while providing the contact needed for controlled transfer and positioning.
Wear-resistant, high-grip covers are used on pullers and haul-off systems for wire, cable, hose, tube and extruded profiles. Product marking and compression limits must be defined.
Coated belts can feed, space, hold and position components in assembly, inspection, sorting and pick-and-place equipment where repeatable timing is required.
For direct or repeated food contact, confirm the exact compound and supporting compliance documents for the target market. U.S. projects may review 21 CFR 177.2600 for rubber articles intended for repeated use; a color or generic 'food-grade' label is not enough.
Selected rubber or foam surfaces can move fabric, webbing, nonwovens and soft products while controlling slip, pressure and surface marking.
Custom lanes, grooves, holes and surface finishes support machine-tool parts, woodworking panels and other special products that need timed feeding, vacuum pickup or controlled release.
Sables supports custom coated timing belt programs from base-belt selection through coating trials, finished geometry control, OEM identification and repeat supply. The focus is a released specification that can be reproduced for the approved product-contact task.
Base timing belt geometry is matched first, with more than 6,000 mold assets available as supporting evidence for platform review. Solid, cellular or finished coating routes are then selected around contact performance and machine constraints.
The rubber coating is integrally molded with the belt instead of being added as a separate bonded layer. This helps reduce the risk of layer separation or debonding during repeated bending, compression and product-contact cycles, while supporting a more consistent finished structure for long-term operation.
Structured samples can compare grip, compression, recovery, release, marking, cleaning and edge behavior using the actual product and defined operating conditions.
Approved base code, coating grade, thickness, overall height, lane map, edge geometry, joint position, test condition and retained sample can be linked to lot and revision records.
Agreed item codes, markings, labels, protective winding, edge protection and shipment grouping can support OEM assembly and plant-level spare-part management.
With 26+ years of manufacturing experience, 60+ patents, annual capacity above 8 million belts and 20,000+ enterprises served, Sables can retain approved specifications and packaging requirements for continuing supply.
For an initial enquiry, send the existing belt or drawing, product information, required coating area and quantity. Additional contact, cleaning and machine data can be provided where available for technical review.
The complete field list below supports detailed review, but unverified information can be marked as unknown. Sables can then separate common platform items from coatings or geometries that require independent samples and approval.
Program Field
Data to Provide
Process stage
Infeed, holding, transport, inspection, transfer or discharge
Product family
Shapes, dimensions, mass, material, surface and allowed marking
Contact objective
Grip, cushioning, recovery, release, height or protection
Base belt
Form, material, marking, tooth system, length or tooth count
Pulley system
Smallest diameter, wrap, back idlers, flanges and guides
Cover family
Natural/high-friction rubber, NBR, EPDM, silicone, FKM, sponge rubber or another approved elastomer
Cover response
Hardness, density, skin, initial deflection and recovery
Program Field
Data to Provide
Coated geometry
Thickness, overall height, lane width, offset and edge finish
Surface map
Smooth, textured, ground, grooved, relieved or uncoated zones
Joint and phasing
Belt joint, cover seam and position relative to the process
Contact cycle
Pressure, speed, dwell, slip, starts and cycles per day
Cleaning and exposure
Chemical, temperature, rinse, dust, oil and drying
Approval test
Product trial, measurements, duration, sample and acceptance rule
Commercial plan
Item count, quantity, labels, packaging, date and repeat schedule
Selection, coating, pulley compatibility, cleaning, trial approval and repeat-order control.
Use a cover when the process needs controlled grip, cushioning, release, contact height or product protection beyond the base belt surface.
Natural or high-friction rubber, NBR, EPDM, silicone, FKM and sponge rubber can be reviewed. Selection depends on grip, oil or chemical exposure, temperature, cushioning, cleaning and release.
Sometimes, but the requirements compete. The solution may use controlled pressure, texture direction, a release zone or different surfaces at separate process stages.
No. Add compound or grade, solid or cellular form, density when relevant, thickness, finish, compression conditions and recovery acceptance.
Often it can be evaluated. Show every lane width, edge offset, termination, product path and clearance to guides and pulley flanges.
Name the tooth-side and working-side datums, measurement force, location and whether the cover is ground or compressible.
Yes. Finished thickness and deformation alter bending demand, especially with small pulleys or backside idlers. Review the complete route before approval.
Test the actual chemical, concentration, temperature, contact time, rinse and drying cycle on the cover, bond, base belt, joint and marking.
Record product identity, pressure, speed, dwell, release, slip, marking, cover height, temperature, cleaning and cycle count against an acceptance rule.
Yes. Approved base belt codes, coating grades, lane maps, finished dimensions, surface specifications, joint positions, trial conditions, packaging and revision requirements can be retained for controlled repeat supply.
Share your existing belt or drawing, required coating area, product-contact requirement and quantity. Unknown fields can be marked for technical review.